 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DATA S H E E T MINIATURE SIGNAL RELAY ED2/EF2 SERIES Ultra-low power, compact and lightweight, High breakdown voltage, Surface mounting type DESCRIPTION NEC's new miniature signal relays, ED2/EF2 series, achieved 50 mW of ultra low power consumption. FEATURES TM Low power consumption (50 mW) TM Applicable for the surge voltage standard of FCC (1500 V, 10 x 160 s) and BELLCORE (2500 V, 2 x 10 s) TM Two types for through-hole mounting (ED2 series) and surface mounting (EF2 series) TM Variation of dense mounting type and/or long-joint-life type for latest SMT * Compatible configuration and terminal allocation with dense mounting type of EE2 series * Upgraded soldering joint reliability between the relay terminal and PCB by optimization of the terminal configuration; 20-year-joint-life under 35C-per-day-temperature-difference specified in IPC-SM-785 for telecommuication equipment APPLICATIONS Electronic switching systems, PBX, terminal equipment, telephone system, instrumental equipment. For Right Use of Miniature Relays DO NOT EXCEED MAXIMUM RATINGS. Do not use relays under exceeding conditions such as over ambient temperature, over voltage and over current. Incorrect use could result in abnormal heating, damage to related parts or cause burning. READ CAUTIONS IN THE SELECTION GUIDE. Read the cautions described in NEC's "Miniature Relays" (ER0046EJ) when you choose relays for your application. The information in this document is subject to change without notice. Document No. ER0304EJ2V0DS00 (2nd edition) Date Published February 1999 M Printed in Japan (c) 1997 ED2/EF2 SERIES DIMENSIONS AND PAD LAYOUTS (Unit : mm (inch)) ED2 SERIES 15.0 (0.59) MAX. 9.4(0.37) MAX. 7.5 (0.30) MAX. 8 - 0.8 (0.031) 10- 0.8 (0.031) 3.2 (0.13) 0.5 (0.02) 5.08 2.54 2.54 2.54 (0.20)(0.10)(0.10)(0.10) 0.25 (0.01) 5.08 (0.20) 2.54 (0.100) 4 x 2.54 (0.100) 2.54 (0.100) 5 x 2.54 (0.100) (Bottom fiew) Note. General tolerance : 0.2 (0.008) Dimensions in show basic size. NJ type : Leads-2.8 mm (0.110) Note. General tolerance : 0.1 (0.004) EF2 SERIES EF2-.. EF2-..NU 15.0 MAX. (0.591) 10.0 MAX. (0.394) 7.5 MAX. (0.296) EF2-..NUX 1.0(0.039) 15.0 MAX. (0.591) 10.35 MAX. (0.408) 7.5 MAX. (0.296) 2 x 2.54(0.100) Non-latch and Single coil latch 2 x 2.54(0.1) 2.54(0.1) Double coil latch 2.54(0.100) note2 A 1.0 (0.039) 1.35 (0.053) note2 note2 5.08 (0.200) 2-2.54 (2-0.100) 5.08 (0.200) 9.5 (0.374) 5.08 (0.200) note2 2-2.54 (2-0.100) 5.08 (0.2) 9.0 (0.354) 5.08 (0.200) 3-2.54 (0.100) (Bottom view) EF2-..NUH 15.0 MAX. (0.591) 10.0 MAX. (0.394) 7.5 MAX. (0.296) EF2-..NUN 15.0 MAX. (0.591) 10.6 MAX. (0.418) 7.5 MAX. (0.296) note2 5.08 (0.200) 2-2.54 (2-0.100) 5.08 (0.200) 7.5 (0.295) 5.08 (0.200) note2 2-2.54 (2-0.100) 5.08 (0.200) 7.5 (0.295) Type EF2-.. EF2-..NU EF2-..NUX EF2-..NUH EF2-..NUN A 3.0 (0.118) 3.0 (0.118) 2.73 (0.107) 2.0 (0.079) 2.0 (0.079) B 7.29 (0.287) 7.29 (0.287) 7.02 (0.276) 6.29 (0.248) 6.29 (0.248) 1.0 (0.039) 1.6 (0.063) Note 1. General torelance : 0.2 ( 0.008) Note 2. This pair of pins at the right end applies to double coil latch type only. Note 1. General torelance : 0.1 ( 0.004) Note 2. This pair of pads at the right end applies to double coil latch type only. 2 DATA SHEET ER0304EJ2V0DS00 B ED2/EF2 SERIES PIN CONFIGURATIONS (bottom view) ED2 SERIES 1 3 4 5 RS Index mark of relay direction 12 10 9 8 12 10 9 8 1 3 4 5 S 12 10 9 8 7 1 3 4 5 6 R Non-latch type (not energized position) Single coil latch type (reset position) Double coil latch type (reset position) S : Coil polarity of set (operate) R : Coil polarity of reset (release) EF2 SERIES 1 3 4 5 1 3 4 5 1 3 4 5 6 RS S 12 10 9 8 12 10 9 8 7 R Index mark of relay direction 12 10 9 8 Non-latch type (not energized position) Single coil latch type (reset position) Double coil latch type (reset position) S : Coil polarity of set (operate) R : Coil polarity of reset (release) MARKINGS (top view) 1 2 2 1 q Part number ED2-5 ED2-5NU w Manufacturer e Country of origin r Date code 5 9717 4 6 t Index mark of relay direction (pin No. 1, 12) 3 Standard type 4 3 UL recognized, CSA certified type (Under application for latch type) y UL, CSA Marking JAPAN 9717 5 JAPAN SAFETY STANDARD AND RATING UL Recognized CSA Certificated (UL508)* (CSA C22.2 No14) File No E73266 File No LR46266 30 Vdc, 1 A (Resistive) 110 Vdc, 0.3 A (Resistive) 125 Vac, 0.5 A (Resistive) * Spacing : UL114, UL478 DATA SHEET ER0304EJ2V0DS00 3 ED2/EF2 SERIES PERFORMANCE CHARACTERISTICS (Community) Contact Form Maximum Switching Power Contact Ratings Maximum Switching Voltage Maximum Switching Current Maximum Carrying Current Minimum Contact Ratings Initial Contact Resistance Contact Material Nominal Operating Power Non-Latch Type Single Coil Latch Type Double Latch Type Operate Time (Excluding Bounce) Release Time (Excluding Bounce) Insulation Resistance Between Open Contacts Breakdown Voltage Between Adjacent Contacts Non-latch type and single-coil latch type 1500 Vac for one minute (2500 V surge, 2 x 10 s *2) Double-coil latch type 1000 Vac for one minute (1500 V surge, 10 x 160 s *1) 735 m / s2 (75 G) (misoperating) 980 m / s2 (100 G) (destructive failure) 10 to 55 Hz at double amplitude of 3 mm (20 G) (misoperating) 10 to 55 Hz, double amplitude of 5 mm (30 G) (Destructive failure) Non-latch type (Additional "N"): -40 to +85C Ambient Temperature Non-latch type (Standard): -40 to +70C Latch type : -40 to +70C Coil Temperature Rise No-load Running specifications Load Weight 7 degrees at nominal coil voltage (50 mW) 1 x 108 *3 operations (Non-latch type) 1 x 107 operations (Latch type) 50 Vdc 0.1 A (resistive), 1 x 106 operations at 70C 10 Vdc 10 mA (resistive), 1 x 106 operations at 70C Approximately 2.2 grams 2 Form c 30 W (resistive) 220 Vdc 1A 2A 10 mV.dc, 10 A *4 50 m typ. (Initial) Silver alloy with gold alloy overlay 50 to 70 mW 30 to 80 mW 50 to 80 mW Approximately 3 ms Approximately 2 ms without diode 1000 M at 500 Vdc 1000 Vac for one minute (1500 V surge, 10 x 160 s 1) 62.5 VA (resistive) 250 Vac Between Coil and Contact Shock Resistance Vibration Resistance 1 rise time : 10 s, fall time : 160 s 2 rise time : 2 s, fall time : 10 s 3 This shows a number of operation where it can be running by which a fatal is not caused, and number of operation by wich a stesdy characteristic is maintained is 1 x 107 times. 4 This value is a reference value in the resistive load. Minimum capacity changes depending on seitching frequency and enviroment temperature and the load. 4 DATA SHEET ER0304EJ2V0DS00 ED2/EF2 SERIES PART NUMBER SYSTEM ED2 - 9 S NU Nil : Standard type NU : UL recognized, CSA certified type NJ : Trimed leads (UL recognized, CSA certified type) Latch type Nil : Non-latch type (Note 1) S : Single coil latch type T : Double coil latch type Nominal coil voltage 1.5, 3, 4.5, 5, 6, 9, 12, 24 V ED2 series EF2 - 5 S NUH Feature Nil NU NUX NUH NUN : Standard type : UL recognized, CSA certified type : High solder joint reliability (20 years) : Minimum footprint (7.5 x 15) : High solder joint reliability with minimum footprint Latch type Nil : Non-latch type (Note 2) S : Single coil latch type T : Double coil latch type Nominal coil voltage 1.5, 3, 4.5, 5, 6, 9, 12, 24 volts EF2 series (UL, CSA : Under application for latch type) Note 1. There are two specification in operate voltage of Non-latch type relay. Part Number Additional "N" type Standard type : Nominal coil voltage ED2-*NU -*NJ ED2- Must Operate Voltage 75% 80% Note 2. There are two specification in operate voltage of Non-latch type relay. Part Number ED2-*NU -*NUX -*NUH -*NUN EF2- Must Operate Voltage Additional "N" type 75% Standard type : Nominal coil voltage 80% DATA SHEET ER0304EJ2V0DS00 5 ED2/EF2 SERIES NOMINAL LINEUP (Community) Non-latch Type (Standard) Nominal Coil Voltage (Vdc) 1.5 3 4.5 5 6 9 12 24 Coil Resistance () 10 % 45 180 405 500 720 1473 2400 8229 Must Operate Voltage (Vdc) 1.2 2.4 3.6 4 4.8 7.2 9.6 19.2 Must Release Voltage (Vdc) 0.15 0.3 0.45 0.5 0.6 0.9 1.2 2.4 at 20C Nominal operate power (mW) 50 50 50 50 50 55 60 70 Non-latch Type (Additional "N") Nominal Coil Voltage (Vdc) 1.5 3 4.5 5 6 9 12 24 Coil Resistance () 10 % 45 180 405 500 720 1473 2400 8229 Must Operate Voltage (Vdc) 1.13 2.25 3.38 3.75 4.5 6.75 9 18 Must Release Voltage (Vdc) 0.15 0.3 0.45 0.5 0.6 0.9 1.2 2.4 at 20C Nominal operate power (mW) 50 50 50 50 50 55 60 70 Single-Coil Latch Type Nominal Coil Voltage (Vdc) 1.5 3 4.5 5 6 9 12 24 Coil Resistance () 10 % 75 300 675 833 1200 2700 4800 7200 Must Operate Voltage (Vdc) 1.2 2.4 3.6 4 4.8 7.2 9.6 19.2 Must Release Voltage (Vdc) 1.2 2.4 3.6 4 4.8 7.2 9.6 19.2 at 20C Nominal operate power (mW) 30 30 30 30 30 30 30 80 6 DATA SHEET ER0304EJ2V0DS00 ED2/EF2 SERIES Double-Coil Latch Type Nominal Coil Voltage (Vdc) 1.5 S R S R S R S R S R S R S R S R Coil Resistance () 10 % 45 45 180 180 405 405 500 500 720 720 1620 1620 2880 2880 7200 7200 Must Operate Voltage (Vdc) 1.2 - 2.4 - 3.6 - 4 - 4.8 - 7.2 - 9.6 - 19.2 - Must Release Voltage (Vdc) - 1.2 - 2.4 - 3.6 - 4 - 4.8 - 7.2 - 9.6 - 19.2 at 20C Nominal operate power (mW) 50 3 50 4.5 50 5 50 6 50 9 50 12 50 24 80 Recommended coil voltage with ambient temperature Non latch typ (Additional "N") Latch typ 150 150 A ratio of nominal coil voltage (%) - 40% / 45 deg A ratio of nominal coil voltage (%) 110% - 40% / 30 deg 110% 100 90 80 70 60 50 - 40 57% - 40 0 20 40 60 80 75% 95% + 20% / 65 deg 100 90 80 70 60 50 - 40 - 40 0 20 40 60 80 73% 85% +10% / 50 deg 95% Ambient temperature (C) Ambient temperature (C) DATA SHEET ER0304EJ2V0DS00 7 ED2/EF2 SERIES TYPICAL PERFORMANCE DATA q Coil Temperature Rise 20 Coil Temperature Rise(deg) q Breakdown Voltage Cumulative Distribution(%) 15 10 99.99 99.9 99 95 90 80 60 40 20 10 5 1 0.1 0.01 1 5 Between adjacent contacts Between coil and contacts Between open contacts 0 2 50 100 150 Applied Power(mW) at 20C 200 3 4 5 Breakdown Voltage(KV,AC) q Operate Time Operate Time Operate Time or Bounce Time at Operate(ms) q Release Time without diode Release Time or Bounce Time at Release(ms) 2 4 Release Time 1 Bounce Time at Release 0 50 100 150 200 2 Bounce Time at Operate 0 50 100 150 Applied Power(mW) 200 250 Applied Power(mW) q Contact Resistance Cumulative Distribution(%) 99.99 99.9 99 95 90 80 60 40 20 10 5 1 0.1 0.01 0 q Release Time with diode Release Time or Bounce Time at Release(ms) 4 Release Time 2 Bounce Time at Release Make contact Break contact 10 20 30 40 50 60 70 80 90 100 Contact Resistance(m) 0 50 100 150 200 Applied power(mW) q Switching Capacity 2.0 Switching Capacity(A) q Transfer Time Cumulative Distribution(%) DC Load(resistive) AC Load(resistive) 1.0 0.5 0.4 0.3 0.2 99.99 99.9 99 95 90 80 60 40 20 10 5 1 0.1 0.01 0 At operate At release 30 100 200 Switching Voltage(V) 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 Transfer Time(ms) 8 DATA SHEET ER0304EJ2V0DS00 ED2/EF2 SERIES q Magnetic Interference (ED2 Relay) Drift of Operate Voltage(%) Drift of Release Voltage(%) 40 30 20 10 0 -10 -20 -30 -40 40 30 20 10 0 -10 -20 -30 -40 Max. Max. Min. Min. I II III Layout IV V VI I II III Layout IV V VI ON ON OFF OFF ON OFF , ,, ,, , ON OFF Layout I Layout II Layout III Layout IV ON ON ON OFF OFF OFF Sample Layout V Layout VI Mounting Layout mm(inch) q Mechanical Life 5 4 Operate Voltage or Release Voltage(V) at 70C, 50 operation/sec Contact Resistance(m) Operate Voltage Release Voltage 1000 500 300 200 100 50 30 20 10 0 at 70C, 50 operations/sec Make contact Break contact 3 2 1 0 1 2 3 4 10 5 Number of Operations(x10 operations) 1 2 3 5 10 5 Number of Operations(x10 operations) 2.54 (0.1) DATA SHEET ER0304EJ2V0DS00 9 ED2/EF2 SERIES TUBE PACKAGE (ED2, EF2) Dimension of Package (Unit : mm) 35 pieces / Tube Material : Polyvinyl chloride (anti-static treated) 543 1 15.5 0.3 11.9 0.3 (0.5 t) (2.4) (4.8) ( ) Reference Outline of Package Rubber stopper (Red) Rubber stopper (Green) Index Mark TAPE PACKAGE (EF2) APPEARANCE TAPE DIMENSION mm (inch) 1.75(0.069) A 0.4 (0.016) Reel Top cover tape 2.0(0.079) Embossed carrying tape B A EF2- Max.10.9 EF2-NU (0.429) EF2-NUX EF2-NUH Max.11.1 EF2-NUN (0.437) B 10.0 (0.394) 8.0 (0.315) Relay orientation mark and tape carrying direction. Orientation mark Orientation mark Tape carrying direction Carrying tape type Part number L EF2-***-L R EF2-****-R 10 DATA SHEET ER0304EJ2V0DS00 15.5 (0.610) 2.2 (0.087) 11.5 (0.453) 24.0(0.945) 1.5 (0.054) 16.0(0.63) 4.0(0.157) ED2/EF2 SERIES SOLDERING TEMPERATURE CONDITION Through-hole mounting type (ED2) q Automatic soldering * Preheating * Solder time w Manual soldering * Solder temperature : 350C max. * Solder time : 3 seconds max. : 100C max. 1 minute max. : 10 seconds max. * Solder temperature : 250C max. Surface mounting type (EF2) IRS Method T max.; 235 200 Temperature (C) 175 150 30 sec. 80 sec. 200 sec. Time VPS Method T max.; 215 Temperature (C) 200 max. 165 max. 100 max. Time 60 sec. max. 60 sec. 90 sec. max. Note: 1. Temperature profile shows printed circuit board surface temperature on the relay terminal portion. 2. Check the actual soldering condition to use other method except above mentioned temperature profiles. DATA SHEET ER0304EJ2V0DS00 11 ED2/EF2 SERIES GUIDE TO APPLICATIONS 1. When connecting coils, refer to the pin configuration to prevent misoperation or malfunction. 2. The latch type relay should be initialized at the appointed position (set or reset position) when using, and should be energized or deenergized to the specified polarity to avoid wrong operations by reversed contact state. 3. Ultrasonic cleaning is not recommended to keep contact performance reliable. Alcohol based solvents are available as proper solvents. 4. Pressurized stress on the relay cover may affect reliable operation. 5. Minimum contact load of the relay is 10 mVdc, 10 A. This value is a reference value in the resistance load. Minimum capacity changes depending on switching frequency and environment temperature and the load. 12 DATA SHEET ER0304EJ2V0DS00 ED2/EF2 SERIES DATA SHEET ER0304EJ2V0DS00 13 ED2/EF2 SERIES 14 DATA SHEET ER0304EJ2V0DS00 ED2/EF2 SERIES DATA SHEET ER0304EJ2V0DS00 15 ED2/EF2 SERIES No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. While NEC Corporation has been making continuous effort to enhance the reliability of its electronic components, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC electronic component, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and antifailure features. NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact an NEC sales representative in advance. Anti-radioactive design is not implemented in this product. |
Price & Availability of ED2-9T
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |